Like most people, you probably use a pool robot to clean your pool. These little robots can be a huge time saver, making cleaning the pool much easier. However, there is one problem that many people experience with these robots: they keep flipping over!
The number one reason pool robots flip over is due to a high water level. If water levels in your swimming pool are high, it can cause the robot to flip over on the coping. You must lower your pool’s water level to normal to fix this problem.
The rest of the article explains other potential causes and solutions for a pool robot that keeps flipping over. Following this blog post’s advice, you can keep your pool robot running smoothly and avoid frustrating flips!
Leading Causes and How To Fix Them
If your pool robot keeps flipping over, there are a few possible reasons:
Water Level – Top Reason
The high water level in swimming pools is a common cause of robots flipping over. Your pool robot will face problems once it reaches the coping with high water levels. The coping is the pool’s edge where the tile meets the concrete.
There are sensors on your pool robot that tell it when to turn around, but if the water level is too high, these sensors can be obstructed and cause your pool robot to keep flipping over.
What To Do?
To fix this problem, lower the water level in your swimming pool. You can do this by draining some of the water or using a submersible pump to remove the water. Ensure the water level is at least a few inches below the coping before using your pool robot.
Believe it or not, one of the most common causes of a pool robot flipping over is simply because it’s unclean. A dirty filter can weigh down the robot and cause it to become top-heavy, making it more likely to tip over.
Debris can also get stuck in the brushes and wheels of your pool robot and cause it to flip over.
What To Do?
To fix this problem, clean your pool robot regularly. This includes cleaning the filter, brushes, and wheels. If you do this regularly enough, it should remain in pristine condition for much longer, and you shouldn’t have to worry about the robot flipping over.
If your pool robot is set to an incorrect setting, this can cause it to flip over. This is because these settings cause the pool robot to move faster and make sudden turns, which can cause it to tip over. Always ensure your pool robot is set to the correct settings before turning it on.
What To Do?
Set your pool robot to normal. This setting will cause the pool robot to move slower and make gentle turns, preventing it from flipping over. If your pool robot is set to move faster and make quicker and sharper turns, it may even break when flipping over.
The weight of your pool robot can also be a factor in why it keeps flipping over. If the weight of your pool robot is not distributed evenly, it can cause the robot to flip over when it tries to turn. Sometimes the water gets into the handles of your pool robot and causes it to become unbalanced.
What To Do?
The best way to fix this problem is to check the weight distribution of your pool robot. Make sure the handles are dry and that the weight is evenly distributed. If there’s water pooling into one side, empty it out before turning it back on.
If your pool robot keeps flipping over, it could be because of suction problems. If the suction cups on your pool robot are not working properly, they will not be able to grip the pool floor and will cause the robot to flip over.
What To Do?
Check the suction cups on your pool robot. Make sure they are clean and free of debris. You should also ensure the suction cups are properly attached to the robot. If they have come apart and aren’t fixed to the robot, you may need to replace them.
No one likes a dirty pool. Not only is it unsightly, but it can also lead to health hazards if the water is not properly treated. One of the most basic problems pool owners face is the algae buildup on the tiles.
While algae are naturally occurring, they can quickly become out of control if they are not removed regularly. The algae can start to coat the tiles when this happens, causing your pool robot to slip and flip over.
In addition, the algae can make it difficult for the robot to move around and perform its cleaning functions. As a result, it is important to regularly clean your pool and remove any growth that might be starting to form.
Doing so will help keep your swimming pool looking its best and prevent accidents due to algae buildup.
What To Do?
The best way to fix this problem is to clean your pool regularly. This includes removing any algae that might be starting to form. You can do this by scrubbing the tiles with a brush. Using algaecides weekly can help prevent algae from growing in the first place.
Consequences of Not Fixing This Problem
If you do not fix this problem, your pool robot will continue to flip over and not be able to clean your pool effectively. In addition, the running motor will also get exposed to air and eventually overheat and break down.
Not only will this be a costly repair, but it will also mean that you will have to clean your pool by hand until the problem is fixed. Therefore, taking care of this problem as soon as possible is important.
If your pool robot keeps flipping over, there are a few things you can do to fix the problem:
- Check the water level and make sure it is not too high.
- Clean the filter on your pool robot and check for algae buildup.
- Check the weight distribution of your robot and check for suction problems.
If you have tried all these things and your pool robot keeps flipping over, you may need to replace it.